Image may be NSFW.
Clik here to view.
AVX Corp. has extended its new series of BTB pin jumper series and module-to-module connections in solid-state lighting (SSL) and other low-pin-count industrial applications with a new two-position pin jumper. When used in conjunction with the new 2.5 mm 70-9296 Series STRIPT horizontal, poke-home contact without a wire stop — which is both the first industrial poke-home connector available without an integral wire stop and, currently, the only industrial poke-home connector with a 2.5-mm profile — the new one- and two-position 10-9296 Series BTB pin jumpers are allowed to pass straight through the contacts, completely unrestricted, until the final, user-defined mating dimension is achieved.
Unlike traditional BTB pin jumpers — which are made to mate with traditional connectors and are thus closed on the back end, limiting the depth to which a pin can travel and restricting the amount of BTB or module-to-module mating tolerance that the jumper can absorb — the new 10-9296 Series BTB pin jumper/709296001025016 contact combination absorbs the maximum amount of component and assembly tolerances during the mating process, effectively eliminating the PCB and housing tolerance stack-up issues common to traditional connector systems in linear and coplanar applications.
The new 10-9296 Series BTB pin jumpers are rated for 9 A, 300 Vac based on contact spacing, three-cycle durability, and operating temperatures spanning –40° to 105°C, and are currently available in one- and two-position versions in two different pin lengths. The 26 mm pins are designed to support linear BTB connections, while the currently unique-to-market 38.15 mm pins are designed to support linear module-to-module connections in which the contacts are embedded within plastic housings. All four variants have a standard 1-mm diameter pin that is mating-compatible with competitors’ traditional 4-mm-pitch poke-home connectors, as well as the company’s own 70-9296 Series 2.5 mm STRIPT contacts — but offer two clear advantages: a shortened insulator (just 5.1 mm) and a unique insulator geometry with dual-chamfered ends that provide a watertight connection when seated within a corresponding housing cavity.
“We tooled our one-position 10-9296 series pin jumper for a customer and then released it to market in April to provide engineers working on SSL and other low-pin-count industrial applications with user-friendly solutions for achieving variable final mating positions for maximum tolerance absorption, especially when combined with our new no-wire-stop 2.5-mm 70-9296 Series STRIPT poke-home contacts,” said Tom Anderson, connector product manager at AVX. “We tooled the new two-position 10-9296 Series pin jumper as a standalone product to help resolve customer frustrations regarding the unstable delivery schedule of similar products from competitors. However, AVX didn’t just duplicate the current products on the market. We re-engineered our product to make it cleaner than competitors’ offerings, which are often built as a larger version and then broken or cut to length, leaves burrs or vestiges behind. All of the customers who have sampled our new two-position BTB pin jumper have commented on the sleekness and cleanliness of our product.”
The new 10-9296 Series BTB pin jumpers have a glass-filled Nylon PA-66 insulator approved to UL94 V-0 and lead-free, tin-over-nickel-plated brass contacts. UL approval is in progress, and is expected in shortly.
AVX Corp.
www.avx.com
The post BTB pin jumper series for maximum tolerance absorption appeared first on EE World Online | A network of resources for engineers.
